|
Model
|
637JBU
|
|
Interface
|
1.TF card slot 2. 2.4GWifi Support 3. Power Interface(Micro USB) 4. Reset Button
5. Built-in Microphone & Speaker 6. 4PCS SMT 940nm lights, Night Vision up to 23 feet |
|
Pan/Tilt
|
PTZ: Pan: 350°,Tilt:90°
|
|
Image Sensor
|
superpix SP2307 2 million pixels
|
|
Display Resolution
|
2.0MP, 1080P 1920*1080(640*360)
|
|
Lens
|
HD 2 million lens, f= 3.6mm F=2.2mm angle110°
|
|
Power Input
|
5V 1A<5W
|
|
Wireless Speed
|
IEEE802.11b/g/n 150Mbps
|
|
Operating Frequency
|
2.4GHz WIFI
|
|
Security
|
64/128-bit WEP, WPA/WPA2,WPA-PSK/WPA2-PSK
|
|
Protocols & Standards
|
TCP/IP,UDP/IP,HTTP,DHCP,NTP,802.11b/g/n
|
|
Image Compression
|
H.264
|
|
Image rotation
|
Invert
|
|
Maximal Frame Rate
|
15 frames / sec
|
|
Code rate
|
425kbps-1024kbps
|
|
Account permissions
|
Support user sharing permissions
|
|
Motion Detection
|
Support motion detection
|
|
Device version requirement
|
IOS 9.0 or higher (iphone 5S and its follow-up models)
Android 4.0 or higher |
|
Audio
|
G.711
|
|
Dimension(mm)
|
110*81*81mm
|
|
Weight(g)
|
380g
|
|
Package Contents
|
One IP-Camera + One Power adapter+Mounting bracket set + One Quick Guide
|
In the history of the baby monitor industry, 2.4G digital baby monitors and 40/49M baby monitors occupy the main part. Since the 1980s, the 40/49MHz baby monitor production industry has basically adopted more than ten MHz crystal oscillations and then tripled the frequency to obtain the operating frequency. The advantages of this solution are simple technology and low cost, but the 3 doubling frequency leads to the circuit There are a lot of unnecessary harmonics and fundamental waves in it. In order to filter out the unwanted frequencies, the desired frequency is usually selected by means of mid-cycle tuning. Therefore, production and debugging are complicated, with a high defect rate, and one crystal is required for one operating frequency. For monitors with multi-channel selection, multiple crystals are required, which increases the production cost and the complexity of mid-week tuning. With the rapid economic development, the rapid upgrading of electronic products, and fierce competition among industry enterprises, product cost control has become an important threshold for consumer electronics. At present, the foreign baby monitor industry is relatively mature and widely used, with well-known brands such as Angelcare.
Compared with 2.4G digital baby monitors, 40/49M baby monitors have a huge cost advantage, which makes them always occupy a large proportion of the baby monitor market, but because most of the chip design companies’ products are aimed at the RF market Therefore, products that can be applied to 40-49MHz baby monitors are rare, the MCD2006S chip, which is similar to the situation not only in China but also abroad. The current domestic better solution is to use phase-locked loop chip technology, well-known brands such as Maxic. The result of using this technology is to simplify the production and debugging of the baby monitor, improve the production yield, and solidify the ROM and RF power amplifier functions of the 40/49MHz baby monitor commonly used frequency points.
